The spring’s tail is located on the perim-
eter of the spring housing. This part may
be sharp! Use leather gloves or a heavy
shop towel to cover the tail while loading or
unloading return spring pressure. Failure
to use such precautions may result in per-
sonal injury.
Return Spring
To adjust the spring tension:
1.
2.
3.
Figure 41
Do not completely remove the cover! If
you remove the spring cover, the spring
will uncoil rapidly and create a great risk
of injury.
Figure 41.
4.
5.
Figure 42
Figure 42.
6.
Quill
