The information contained herein is deemed accurate as of 5/27/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G3358
Main Specifications:
Operation Info
Spindle Travel.............................................................................................................................................. 5 in.
Swing................................................................................................................................................... 15-7/8 in.
Longitudinal Table Travel.....................................................................................................................23-1/2 in.
Cross Table Travel....................................................................................................................................... 7 in.
Ram Travel.................................................................................................................................................12 in.
Head Travel..................................................................................................................................................5 in.
Head Swivel.......................................................................................................................................... 360 deg.
Turret Or Column Swivel.......................................................................................................................360 deg.
Max. Dist Spindle To Column.......................................................................................................................7 in.
Max. Dist Spindle To Table.................................................................................................................. 17-3/4 in.
Drilling Cap For Cast Iron.......................................................................................................................1-1/4 in.
Drilling Cap For Steel............................................................................................................................. 1-1/4 in.
No. Of Vert. Spindle Speeds........................................................................................................................... 12
Range Of Vert. Spindle Speeds................................................................................................120 - 2500 RPM
Quill Dia.................................................................................................................................................2.950 in.
Table Info
Table Length........................................................................................................................................ 28-3/4 in.
Table Width............................................................................................................................................ 8-1/4 in.
Table Thickness..................................................................................................................................... 1-7/8 in.
No. Of T Slots....................................................................................................................................................4
T Slots Width......................................................................................................................................... 0.550 in.
T Slots Height........................................................................................................................................0.850 in.
T Slots Centers...................................................................................................................................... 1-3/4 in.
Stud Size................................................................................................................................................... 3/8 in.
Spindle Info
Spindle Taper................................................................................................................................................ R-8
Spindle Sleeve Diameter..............................................................................................................................3 in.
End Milling Cap......................................................................................................................................... 3/4 in.
Face Milling Cap...........................................................................................................................................3 in.
Draw Bar Diameter..................................................................................................................................7/16 in.
Draw Bar TPI...................................................................................................................................................20
Draw Bar Length.................................................................................................................................. 15-5/8 in.
Spindle Bearings......................................................................................................................... Tapered Roller
Lead Screw Info
Lead Screw Diameter............................................................................................................................15/16 in.
Lead Screw TPI...............................................................................................................................................10
Lead Screw Length.................................................................................................................................... 32 in.
Construction
Spindle Housing Const......................................................................................................................... Cast Iron
Table Const................................................................................................................Surface Ground Cast Iron
Head Const...........................................................................................................................................Cast Iron
Column Const.......................................................................................................................................Cast Iron
Base Const........................................................................................................................................... Cast Iron
Paint.......................................................................................................................................................... Epoxy
Other
Collars Calibrated..................................................................................................................................0.001 in.
Column Dia............................................................................................................................................ 4-1/2 in.
Optional Stand..........................................................................................................................................G5944
Mobile Base..............................................................................................................................................G7314
