DYNAMIX HP-51M Coax MDU Master Bridge User’s Guide
25
In the example, the onboard Master (denoted ‘Local’) device driver version is ’2.7.5-2’. The two 3010 EP’s device
driver version is ‘2.7.5-2’, and the five 3110 Smart EP’s driver version is also ‘2.7.5-2’. It is possible that these three
type HCNA devices could be equipped with different driver versions and cooperate inside one working coax
network.
New System Firmware and HCNA Driver Files
In this example, preparing the following binary files to upgrade the HP-51M and the seven connected EPs,
♦ HP51M_Sysfw_V3.06.bin HP-51M system firmware version ‘3.06’
♦ HP51M_Driver_V2.7.5-3.bin HCNA device driver version ‘2.7.5-3’, include Master(Local) driver version
‘2.7.5-3’ , 3010 EP driver version ‘2.7.5-3’, and 3110 Smart EP(as HP-51S) driver version ‘2.7.5-3’
System Firmware
Upload the New System Firmware
Start from the ‘Upload Firmware’ window and click on ‘Upload’ button,
A count-down counter for entering the uploading mode,
Click ‘Continue’ button to proceed,
