32
Using the list screens... (DVD-VR)
1 Display the Original Program screen.
Display the Playlist screen.
2 Select an item you want to start play.
Original Program/Playlist screen
• Original Program
• Playlist
1 Original Program/Playlist number
2 Recording date
3 Recording source (TV station, the input terminal of
the recording equipment, etc.)
4 Start time of recording
5 Title of the program/playlist *
6 Highlight bar (current selection)
7 Creating date of playlist
8 Total number of chapters included in the playlist
9 Playback time
* The title of the original program or playlist may not be
displayed depending on the recording equipment.
Operations using the
on-screen bar
(DVD/DVD-VR/DivX/MPEG/JPEG/VCD)
These operations are possible on the monitor using the
remote controller.
1 Show the on-screen bar ( 33).
2 Select an item.
3 Make a selection.
If pop-up menu appears...
• To cancel pop-up menu, press RETURN.
• For entering time/numbers, see the following.
Entering time/numbers
Press % / fi to change the number, then press @ / # to
move to the next entry.
• Each time you press % / fi, the number increases/
decreases by one value.
• After entering the numbers, press ENT (enter).
• It is not required to enter the zero and tailing zeros
(the last two digits in the example below).
Ex.: Time search
DVD: _:_ _:_ _ (Ex.: 1:02:00)
Press
% once, then # twice to go to the third entry, %
twice, then press ENT (enter).
Removing the on-screen bar
(twice)
EN26-33_KW-AVX726_001A_3.indd 32EN26-33_KW-AVX726_001A_3.indd 32 12/10/08 10:40:05 AM12/10/08 10:40:05 AM
