36
When a call comes in...
The source is changed to “
Bluetooth PHONE
”
automatically.
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
( 25)
When <Auto Answer> is deactivated...
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
or VOL +/–).
Using the Bluetooth cellular phone
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
or VOL +/–).
• You can adjust the microphone volume, 25.
To make a call, use <Dial Menu>. ( 23)
~ Press [SOURCE], then press [Bluetooth PHONE].
Ÿ Press [ ].
! Press [Bluetooth].
⁄ Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu). (
23 – 25)
Name and phone number (if acquired)
FLAT
AM
3:00
SOURCE
Connected Device Name
Status of the device
• Signal strength/Battery remainder (only when
the information comes from the device).
[5 / ∞]: Selects the
other registered device.
Connected device name
• When a cellular phone with audio function is
registered/connected,
appears.
Activates <
Voice Dialing>
function. (Hold)
Display <
Dial Menu> screen.
• Appears on any source information screen
when the Bluetooth adapter is connected.
Bluetooth icon
• Lights up when the Bluetooth adapter
is connected.
EN34-43_KW-AVX726_001A_3.indd 36EN34-43_KW-AVX726_001A_3.indd 36 12/10/08 11:33:35 AM12/10/08 11:33:35 AM
