14
Daily Operations
Turning on the main power
I : Main power on
‡ : Main power off
On the rear panel
Turning on the monitor
From the remote control:
To turn off the monitor, press POWER OFF.
On the main unit:
Each time you press the button, the power
turns on and off .
Selecting an input
From the remote control:
On the main unit:
Each time you press the button,
the input changes.
NOTE
• When “QUICK CHANGE” is set to “INPUT A&B,” you can change
Inputs A and B quickly (see “INPUT CONFIGURATION” on page 21).
Adjusting the volume
From the remote control:
On the main unit:
To turn off the volume immediately:
Pressing the button again resumes the
previous volume level.
•
When using the buttons on the main
unit, set “MUTING” to “ON” on the main
menu (see “AUDIO SETTING” on page 21).
• When the Control Lock is set to “ON” (see page 27),
you cannot use the buttons on the main unit.
• When the Power-on Lock is in set to “ON” (see page
30), you need to enter the password when turning
on the monitor.
05-39_GM-H40L1G-f.indd 1405-39_GM-H40L1G-f.indd 14 05.10.6 1:13:26 PM05.10.6 1:13:26 PM
