A SERVICE OF

logo

EN 29
4
Click "Window" — "VCR" to call up the
VCR Operation window.
5
Operate the video source unit via the
VCR Operation window.
6
Click the "Capture" button on the desired
video image, and index image data (80 x
60 pixels) is transferred to the computer.
•The message "No.1 index image being
transferred" appears during data
transmission.
7
Repeat steps 4 through 6 as necessary.
8
Click "Transfer" button.
•If you want to capture full image data
(768 x 552 pixels) after capturing the
"Index Image" in step 2, select "Index &
Full Image" and click "OK", then click
the "Transfer" button.
1. The message "Index No.1 being scanned"
appears while the video source unit is
scanning the picture to be captured.
2. The message "No.1 index image being
transferred" appears. When you select
"Index & Full Image" in step 2, the
message "No.1 image being transferred."
appears while the full image data is being
transferred to the computer.
3. The images captured in step 7 are scanned
by the video source unit and automatically
transferred to the computer.
00:01:23:12F
I
VCR
Capture
Transfer