11
To 120V AC
Monitor
Flash light
Foot switch, etc.Lens remote control Image processing unit
(Front panel)
VD
LENS
REMOTE
FLASH WEN
FREEZE
VIDEO
VD
HD/VBS
RGB
WEN
VIDEO IN
HD/VBS
Camera head
Microscope adapter
HZ-M161/M162/M163
Microscope
COLOR VIDEO CAMERA
KY-F58
RGB/COMPONENT
Y/CVIDEO
HD/VBS
FREEZE
VD
WENFLASH
OUTPUTEXT REF
EXT TRIGGER
RS-232C
LENS
REMOTE
SEE INSTRUCTION MANUAL
AC- INPUT
3. CONNECTIONS (Cont’d)
SYSTEM APPLICATION
Ⅵ To start a flash light with a foot switch
• Connect an external trigger such as a foot switch to the
FREEZE connector.
• Connect a flash light to the FLASH connector.
• Set the FREEZE MENU to “FLASH”.
Ⅵ To output an image from the KY-F58 under the tim-
ing of the image processing unit
• Connect an external sync signal of the image processing
unit to the VD and HD/VBS connector of this unit.
• Connect the image output connector to the image input
connector of the image processing unit.
Ⅵ To output an image to the image processing unit
under the timing of the KY-F58
• Connect the WEN (Write Enable) connector of the KY-F58
to the image processing unit.
• Connect the image output connector to the image input
connector of the image processing unit.
Note:
Before starting the connection, please thoroughly read the
Technical Information on page 26 and following.
