54
3-1 Starting Up V.Networks Controller
Settings (Step 3 Setting Using the V.Networks Controller)
The installed "V.Networks Controller" can be used to monitor camera images.
In addition, recording/playback operations and setting of frame rate for camera
images are also possible.
1.
Select [Start] † [Programs] † [V. NETWORKS] † [V.Networks Controller] to
start up the "V.Networks Controller".
2
Live images from the camera wil be
displayed.
1
Select the camera to connect to from the
pull-down menu for the camera.
Notes
● Enter the correct password if a password has been set.
● This controller can be connected to VN-C1, VN-C2, VN-C3, VN-C30 (JPEG only), VN-A1, VN-
C10 (JPEG and MPEG) and VN-C625 as well VN-C655.
C655(B)_p54-p77 05.3.16, 1:29 PM54
