KODAK Display Manager System V4.1 User’s Guide 19
Installing and Setting Up Your System
PHOTO RESEARCH PR-650
1. Attach the PHOTO RESEARCH IFC-600 RS-232 cable between the PR-
650 and the computer serial port.
2. Go to Options > Setup.
3. Click the Sensor tab.
4. Click Type and select PhotoResearch PR-650.
5. Click Connection and select the com port that the meter is connected to.
NOTE
Do not turn on the device until instructed by KODAK Display Manager Software.
MINOLTA CS-100A
1. Attach the MINOLTA LS-A12 two way interface cable between the
MINOLTA CS-100A and the computer serial port.
2. When turning the device on, press and hold the F button until a C appears
in the device external display.
3. Go to Options > Setup.
4. Click the Sensor tab.
5. Click Type and select MINOLTA CS-100A.
6. Click Connection and select the com port that the meter is connected to.
