A SERVICE OF

logo

Appendix B
B-1
Appendix B -
Troubleshooting
If you run into a problem operating your camera, check the following table to see if you
can find the cause of the problem. If the trouble persists, take the camera to your nearest
service representative.
Symptom Cause Remedy
Nothing appears in
the Top LCD panel
The Main switch is set to
(
).
The battery needs to be
recharged.
Replace it with a charged
battery or connect the
camera to the AC
adaptor.
The camera settings
cannot be changed.
The Main switch is set to
(
).
Set the Main switch to
(A).
The Quick Control dial
switch is not set to |.
Set the Quick Control
dial switch to (
|
).
Autofocusing does
not operate.
The lens’ Focus Mode
switch is set to (M).
Set the lens’ Focus Mode
switch to (AF).
Custom function F-4 is
set to 1.
Press the AE Lock button
to autofocus, or set
custom function F-4 to 0
and press the Shutter
button halfway.
L
L