A SERVICE OF

logo

Open as PDF
next previous
Progress Monitors 19
E-EQ-MX3MCPLUS-F-ARC MX3 Multi-Charger Plus User’s Guide
Analyze – Final Charge
The final step in the analysis process is to recharge the battery pack after it is fully discharged.
The final charge requires about 2.5 hours.
CHARGE
2
ANALYZE
1310 mAh
11.2 V
Figure 11 LCD Screen, Analyze, Final Charge
The LCD indicates:
• The battery is charging (CHARGE).
• This is the second and final charge (2).
• The battery is under analysis (ANALYZE).
• The battery capacity measured during the analysis (1310mAh). This is an example
and can vary depending on the battery pack’s maximum capacity.
For information on battery capacity, please refer to “Battery Capacity” later in this guide