2
SCANNER AND ACCESSORIES
The following is a list of the parts included in the IS6520/MS6520 Kit.
• Cubit
®
IS6520/MS6520 - Omnidirectional Scanning Engine
• Installation and User’s Guide* –
MLPN 00-02421
• MetroSelect
®
Scanner Configuration Guide*
MLPN 00-02407 or MLPN 00-02561
*Available for download on Metrologic’s website, www.metrologic.com.
The following items are dependent on the type of IS6520/MS6520 Kit ordered.
Some items may not be included in your kit.
• AC to DC Power Transformer - Regulated 5.2 VDC @ 650 mA output.
One of the following may be included:
120 VAC United States – MLPN 45-45593
220 VAC – 240 VAC Continental European –
MLPN 45-45591
220 VAC – 240 VAC United Kingdom –
MLPN 45-45592
• PowerLink Cable with built in power jack (IS6520-41/MS6520-41 only)
One of the following may be included:
Standard -
MLPN 53xxx* - 2.7 m (9') coiled cord, long strain relief
Or
Optional -
MLPN 54xxx* - 2.1 m (7') straight cord, short strain relief
*xxx specifies connection to the host
• Keyboard Wedge Powerlink and Adapter Cable – MLPN 54-54002
Powerlink cable with a 5-pin DIN female connector and a 6-pin mini Din male
connector and an adapter cable with a 5-pin DIN male connector and a 6-pin
mini DIN female connector. (IS650-47/MS6520-47 only)
• Mounting Hardware - Three M3 screws are included for mounting
purposes.
• Tilt Stand -
MLPN 46-46486
• Fixed Vertical Stand -
MLPN 46-46145
To order additional items, contact the dealer, distributor or call Metrologic's
Customer Service Department at 1-800-ID-METRO (1-800-436-3876).
