49
CONNECTIONS
SOURCE-COMPONENT AUDIO/VIDEO SIGNALS AND
VIDEO SYNCHRONIZATION
1. Video Output from Source Components to the
ZR-8630AV
Connect six external composite video sources with male-
to-male RCA video cables. This connection enables the
ZR-8630AV to know a component’s ON/OFF status by
the presence/absence of a video signal.
2. Audio Output from Source Components to the
ZR-8630AV
Connect the six external audio sources with male-to-
male RCA audio cables.
TELEPHONE PAGING
3. Paging Output from Telephone System to the
ZR-8630AV Page Input
Connect the paging output of a telephone system to the
ZR-8630AV with a male-to-male RCA audio cable.
SOURCE-COMPONENT POWER SYNCHRONIZATION
SIGNALS
4. Separate 12V Synchronization from a Source
Component to a ZR-8630AV Sync Input
When you obtain a 12V sync signal from a source com-
ponent (refer to the Source Power Synchronization sec-
tion of this manual for more information), a Niles
Accessory Cable (FG00724) provides proper connection
to any of the six Source Sync Inputs.
IR FLASHERS
5. Low-Output Flasher to the Flasher Outputs
Connect the mini-plug end of a Niles Low-Output
MicroFlasher
™
, Model IRC-2P (FG00726), into the
Flasher Outputs 3-8. Peel back the tape to attach the
Micro-Flasher portion of the IRC-2P directly over the IR
sensor of the corresponding source component (Source 3
for Flasher 3, etc.).
ineered in the USA. Made in Mala
