32
Mode
Units
Setup Print
Enter
4.11 Custom Unit
Custom Unit is enabled when Custom Unit Setup under Units Menu is turned ON. This feature can be used to
create your own custom weighing unit. It permits entering a conversion factor which the balance will use to convert
grams to the desired unit of measure.
Conversion Weight Weight
Factor x in = in
grams custom unit
Conversion factors are expressed in scientific notation
and entered into the balance in three parts:
• a number between 0.1 and 1.999999
called the mantissa
• a power of 10 called the exponent
• a least significant digit (LSD)
SCIENTIFIC NOTATION
Number
Between
Conv. 0.1 and Power Man-
Factor 1.999999 of 10 tissa Exp.
123.4 = .1234 x 1000 = .1234 x 10
3
12.34 = .1234 x 100 = .1234 x 10
2
1.234 = .1234 x 10 = .1234 x 10
1
.1234 = .1234 x 1 = .1234x 10
0
.01234 = .1234 x .1 = .1234 x 10
-1
.001234 = .1234 x .01 = .1234 x 10
-2
.000123 = .123 x .001 = .123 x 10
-3
EXPONENTS
E-3 Moves decimal point 3
places to the left.
E-2 Moves decimal point 2
places to the left.
E-1 Moves decimal point 1
place to the left.
E0 Leaves decimal point
in normal position.
E1 Moves decimal point 1
place to the right.
E2 Moves decimal point 2
places to the right.
E3 Moves decimal point 3
places to the right.
Procedure
• Press the Setup button.
• Press or button until CUSTOM is displayed.
• Press Enter button to save setting, FACTOR is
displayed.
• Press Enter button, The mantissa of the current
conversion is displayed. The mantissa of the cur-
rent conversion factor is displayed. This is a number
between 0.1 and 1.999999 with the first digit flashing.
For conversion factors outside of this range, the
exponent will be used to move the decimal point.
• Press or buttons as directed by
the display and enter a 7 digit number for the conver-
sion factor.
• Press Enter button, EXP (exponent) is displayed.
• Press Enter button, 0 (exponent) is displayed.
• Press or button and select exponent value
either -3, -2, -1, 0, 1, 2, or 3.
Stable
Setup
Use keys to change, press Enter
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change
