Section 700 - Operation Chapter 4. Key Telephone Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-83
• If a ML or MCO key is assigned line group number 9 and LCR has been
activated, LCR is selected automatically.
• Press the ML or MCO key that flashes red to answer incoming calls.
• If one group is set aside for data lines, this feature can be used when a line
is needed for operations such as data transmission via modem.
Prime Line Preference
(All Versions)
Description
Prime Line Preference allows a user to place an outside call by simply
picking up the handset. When the user goes offhook, the trunk or trunk group
assigned to FF1 is automatically accessed. (Be sure to program one of the
other FF keys as an intercom key.)
Operation
1. Pick up the handset.
• The phone issues outside dial tone.
• The LED of the accessed line key lights green.
• “CO TALK #XX” (where “XX” is the line number) appears on the
display.
2. Dial the telephone number.
The number appears on the display.
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF2 (Trunks): Pooled Trunk Access for Group “9”
• FF2 (Trunks): Pooled Trunk Access for Groups “81-86”
• FF3 (Extension): Forced Least Cost Routing
• FF5 (Keys): FF Key Assignment
• FF3 (Extension): Prime Line Pickup
