Chapter 4. Key Telephone Features Section 700 - Operation
4-98 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
3. Dial the telephone number of the party you want to connect to your
original call.
4. After the call goes through, press the
CONF
key.
• A three-party Conference Call is initiated.
• “Conf #XX #YY” (where “XX” is the first line and “YY” the second
line) appears on the display.
5. Press one of the CO keys.
• The two outside lines are connected.
• “Hold #XX #YY” (where “XX” is the first line and “YY” the second
line) appears on the display.
Related Programming
• FF1 (System): Unsupervised Conference Timer
• FF2 (Trunks): Supervised Trunk Line Conference
• FF3 (Extensions): Unsupervised Conference
Considerations
• After the Trunk-to-Trunk Transfer is completed, you cannot add another
party to create a three-party Conference Call.
• When the call is finished, the conference information disappears from the
display and your extension returns to normal operation.
• When the Unsupervised Conference Timer expires, the call is
automatically disconnected.
Voice Mail Transfer Key
(CPC-A II and CPC-B 6.0 or higher)
Description
The Voice Mail Transfer (VM/TRF) key allows transfers to voice mailboxes
without waiting for voice mail to answer. Figure 4-8 on page 4-99 illustrates
how the system handles voice mail transfers.
