36
Function
00 GENERAL LIST Prints the general settings list.
PRESS SET TO PRINT
01 PAPER SIZE Selects the Paper Tray and sets the Paper Size.
(See page 42)
1: TRAY-1 / 2:TRAY-2 (Option)
LETTER
→ A4
→B5
→A5
→LEGAL
PAPER TYPE (LETTER/A4 size only/Tray-1)
1:PLAIN / 2:OHP
03 AUTO RESET TIME Selects the Control Panel reset time. 3:1 min.
1:OFF / 2:30 sec / 3:1 min. / 4:2 min. / 5:3 min. /
6:4 min.
04 ENERGY SAVER MODE Sets the Energy Saver mode and time. 3:SLEEP
1:INVALID / 2:POWER SAVER / 3:SLEEP /
4:SHUTDOWN
Power Saver mode timer: 1-240 min.
Sleep/Shutdown mode timer: 1-240 min.
05 ENERGY SAVER TIME Sets the energy saver timer (power saver mode) Start00:00
Start (ON): 00:00 End (OFF): 00:00 End00:00
Inputs Start and End time with Cursor Keys and
Keypad. Once you set power saver ON/OFF timer,
set timer repeats everyday.
06 LANGUAGE DEFAULT
Selects the default message language for the display.
7:ENGLISH
1:FRENCH / 2:GERMAN / 3:ITALIAN /
4:DUTCH / 5:PORTUGUESE / 6:SPANISH /
7:ENGLISH / 8:GREEK
07 SPECIAL TRAY 1
*
Selects the paper tray to use for special paper. 1:NONE
1:NONE / 2:TRAY-1 / 3:TRAY-2 (Option) /
4:BYPASS
09 KEY/TOUCH BEEP Selects the default touch panel sound level. 2:SOFT
1:OFF / 2:SOFT / 3:LOUD
00 POWER ON DEFAULT Selects the default operation mode. 1:COPY
1:COPY / 2:FAX / 3:PRINTER / 4:SCANNER
01 SORT MEMORY USAGE Selects whether to display the amount of sort 1:OFF
memory used on the control panel.
1:OFF / 2:DISPLAY
02 DEPT. COUNTER Displays the Total Copy usage and copy limit of
Consult your authorized
the selected department.
service provider
04 TONER REPLACEMENT
Selects whether the Toner Cartridge is being replaced.
Selecting "1:YES" will reset the Print Counter.
1: YES 2:NO
05 DRUM REPLACEMENT
Selects whether the Drum Unit is being replaced.
Selecting "1:YES" will reset the Drum Life Counter.
1:YES / 2:NO
06 SUPPLY FORMS
Selects whether to print the Order Forms for Toner or Drum Unit.
1:TONER / 2:DRUM
09 KEY OPERATOR MODE Inputs the key operator password.
ENTER PASSWORD =
■ General Settings
No.
Modes Function
Initial
Setting
The following Parameter Settings require the input of the Key Operator Password:
■ General Settings (For Key Operator)
No.
Modes Function
Initial
Setting
<to be continued>
*
Available only when the optional Tray-2 is installed.
NOTE: When inputting above General Settings mode No., no need to input the first "0", input only the second number
of the two digit display.
