
6.2.4 Interface Specifications (GT02)
Interface for connecting PLC/External devices
- COM port
Item
Communication standard Conforms to RS232C
(Non insulation type)
Conforms to RS422
(Non insulation type)
Communication
condition with
external
devices
9600, 19200, 38400, 57600, 115200 bps
Data length (bit) 7, 8
Parity None, Odd, Even
Transmission distance
(Total length)
Max. 15 m
(Baud rate: 19200 bit/s)
Max. 500 m
(Baud rate: 115200 bit/s)
Terminal resistance value
-
Ω
Protocol - MEWTOCOL (Protocol for PANASONIC PLC: FP series)
- General-purpose serial (PANASONIC dedicated protocol)
- Protocol for other companies' PLCs
(For the details, refer to the latest GTWIN HELP.)
Connector terminal base (8-pin)
Note1) 2) 3)
Note1) It is internally isolated from the input power supply side (between +24V and 0V).
Note2) The (+) and (-) terminals are the power supply terminals for driving the main unit.
Note3) Regarding power supply voltage, please pay due consideration to the cable length so that the
applied voltage is within the operation voltage range.
Interface for transferring screen data
- TOOL port
Connector shape
USB MiniB type 5pin (Male)
No. of connected unit with PC 1 unit
Note1) Take care of handling of the connector not to add an excessive static electricy on the metal part
of the connector.
SD memory card slot (For GT02M2/GT02G2 only)
SD memory card, SDHC memory card
Note1)
Supported format standard
Conforms to SD standard
Note2)
Note1) The manufacturer name that the operation check has done: Panasonic Corporation
Note2) Please format with a format software for SD memory cards.
Note3) The SD access lamp turns on while acccessing the SD memory card.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net