72
To confirm the stored pager number
1. Press (FUNCTION/EXIT/CH).
2. Press (›) or (‹) to select “Calling pager”.
3. Press FWD/EDIT (fl) (Yes key).
4. Press (TALK).
≥The unit dials the stored pager number.
≥If the pager does not beep, check your pager by calling it manually to ensure it
works. Start again from step 1 to store the pager number (p. 71).
To erase the stored pager number
Repeat steps 1 through 6 on page 71. ¤ (INTERCOM/CLEAR) ¤
¤ FWD/EDIT (fl) (Save key) ¤ (FUNCTION/EXIT/CH).
≥The pager call mode will automatically return to OFF (p. 73).
“
Pager Call
≥After step 5 on page 71, do not press (6) (“Pager mode”) and (7) (“Home
number”), moreover do not change these settings. If you have changed these
settings, reset to the default.
(Pager mode: Recorded MSG, Home number: No items)
