7. Programmable Features
40
7 Programmable FeaturesFeatures Summary
7.1 Programming
1 Press {MENU}.
2 Press {#} and the 2-digit code (page 41 to page
45).
3 Press the desired selection to display the desired
setting.
L This step may be slightly different depending on
the feature.
4 Press {SET}.
5 Press {MENU} to exit.
To select features by using the navigator key
You can select a feature by using the navigator key
instead of directly entering the program code (# and a 2-
digit number).
1. Press {MENU}.
2. Select the feature you wish to program.
Basic features
Press {<} or {>} repeatedly to display the desired
feature.
Advanced features
Press {<} or {>} repeatedly to display “ADVANCE
SETTINGS”, then press {SET}.
Press {<} or {>} repeatedly to display the desired
feature.
3. Press {A} or {B} repeatedly to display the desired
setting.
L This step may be slightly different depending on
the feature.
4. Press {SET}.
L The setting you selected is set, and the next
feature will be displayed.
5. To exit programming, press {MENU}.
Note:
L To exit programming, press {MENU} at any time.
{SET}
{<}{>}{A}{B} {MENU}
FL313HK-PFQX2630ZA-en.book Page 40 Tuesday, August 29, 2006 10:19 AM
