1
Press p.
Display:
2
Press ( or ) until the following is
displayed.
3
Press w.
4
Enter your logo, up to 30 characters, using
the dial keypad. See page 21 for details.
Example: “Bill”
1. Press 2 2 times.
Cursor
2. Press 4 6 times.
3. Press 5 6 times.
4. Press ) to move the cursor to the next
space and press 5 6 times.
5
Press w.
●
The next feature will be displayed.
6
Press p.
LOGO=Bill
LOGO=Bil
LOGO=Bi
LOGO=B
LOGO=
AAAAAAAAA
YOUR LOGO
PRESS SET
SYSTEM SET UP
PRESS NAVI.[IH]
Setting your logo
To correct a mistake
●
Press ( or ) to move the cursor to the
incorrect character, and make the correction.
To delete a character
●
Move the cursor to the character you want to
delete and press {.
To insert a character
1. Press ( or ) to move the cursor to the
position to the right of where you want to
insert the character.
2. Press FG to insert a space
and enter the character.
Note:
●
You can enter your logo by pressing + or - in
step 4. In this case, press ) to move the cursor
(see page 21 for details).
The logo can be your company, division or name.
To change capital or lower-case letters
Pressing the # key will change to capital or
lower-case alternatively.
1. Press 2 2 times.
2. Press 4 3 times.
3. Press #.
4. Press 5 3 times.
LOGO=Bil
LOGO=Bi
LOGO=BI
LOGO=B
