Features Summary
58
Code
#01
Setting the date and time
SET DATE & TIME
PRESS SET
See page 19 for details.
See page 20 for details.
See page 22 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails.
“ON”: The sending report will be
printed out after every transmission.
If you are using the unit with an
answering machine, set to more
than 4 (p. 44).
#02
Setting your logo
YOUR LOGO
PRESS SET
Feature & Display Settings How the unit operates
#03
Setting your facsimile telephone
number
YOUR FAX NO.
PRESS SET
#04
Printing the sending report
To print and check the sending
report for fax transmission results
(p. 33).
SENDING REPORT
=ERROR [±]
ERROR
ON
OFF
#06
Changing the ring setting in FAX
ONLY mode
To change the number of rings
before the unit answers a call in
FAX ONLY mode.
FAX RING COUNT
RINGS=2 [±]
2, 3, 4, 5, 6,
7, 8, 9
Programming table
How to set the basic features
1. Press p.
2. Press ( or ) until the desired feature
is displayed.
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
Note:
●
Step 3 may be slightly different depending on the
feature.
●
See page 57 for more details.
Basic features!
For the settings column, the bold type indicates the default setting.
