4.19 [2-10] Extension CID Settings
Various settings for extension Caller ID can be programmed.
Extension Caller ID Modulation Type
Specifies the modulation frequency to be used when sending Caller ID information to an SLT.
Value Range
V.23(ETSI), Bell202(Bellcore)
Maintenance Console Location
4.19 [2-10] Extension CID Settings
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Channel Seizure Signal Bits
Specifies the number of seizure bits to send when sending Caller ID information to an SLT.
Value Range
10 ´ n (n=3–40) bits
Maintenance Console Location
4.19 [2-10] Extension CID Settings
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Mark Signal Bits
Specifies the number of mark bits to send when sending Caller ID information to an SLT.
Value Range
10 ´ n (n=3–40) bits
512 PC Programming Manual
4.19 [2-10] Extension CID Settings
