E
NGLISH - 19
Settings
Menu Navigation
Settings
Navigating through the MENU
J
Displaying the main menu
Press the MENU button to display the main
menu and the operating guidance.
-
+
-
+
-
+
-
+
-
+
-
+
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOUR
TINT
SHARPNESS
COLOUR TEMPERATURE
DYNAMIC IRIS
WAVEFORM MONITOR
SPLIT ADJUST
ADVANCED MENU
MEMORY SAVE
MEMORY LOAD
MEMORY EDIT
NORMAL
ON
0
0
0
0
0
0
PICTURE
POSITION
LANGUAGE
LENS CONTROL
FUNCTION BUTTON
VIERA LINK MENU
OPTION
ENTER
RETURN
SELECT
Main menu
Operating guidance
Contains the required buttons to adjust the settings.
Sub-menu
Current
settings
Adjusting with the bar scale
J
items
The triangle mark under the bar indicates factory
default setting and the square indicates the current
setting
.
Current setting
Default
J
Returning to the previous menu
Press the MENU or RETURN button to return
to the previous menu. Press repeatedly to
escape from the menu mode and return to the
projection.
J
Resetting to the factory default
settings
You can reset most of the customised settings
to the factory defaults by pressing DEFAULT
button of the remote control.
Operating procedure
J
Press ▲ ▼ to scroll to the required main menu 1.
item and press the ENTER button to select.
The selected item is highlighted in orange and the
sub-menu is displayed on the right.
See “Menu list” on page
20.
-
+
-
+
-
+
-
+
H-POSITION
V-POSITION
ASPECT
WSS
OVER SCAN
KEYSTONE
16:9
ON
0
0
+7
0
PICTURE
POSITION
LANGUAGE
LENS CONTROL
FUNCTION BUTTON
VIERA LINK MENU
OPTION
ENTER
RETURN
SELECT
Press ▲ ▼ to scroll to the required sub-menu item 2.
and press ◄ ► or the ENTER button to adjust.
The selected item is called up and the other menu
items disappear from the screen. The Called up item
will disappear after 5 seconds without any operation
and return to the menu mode.
If there is a lower level to the sub-menu item, the
next level will be displayed.
-
+
-
+
-
+
-
+
H-POSITION
V-POSITION
ASPECT
WSS
OVER SCAN
KEYSTONE
16:9
ON
0
0
+7
0
PICTURE
POSITION
LANGUAGE
LENS CONTROL
FUNCTION BUTTON
VIERA LINK MENU
OPTION
ENTER
DEFAULT
RETURN
SELECT
Press ◄ ► to adjust or set the selected item.3.
For items using a bar scale, the current settings are
displayed on the left of the bar scale.
You can cycle through the options of an item by
pressing ▲ ▼.
Press the 4. MENU or RETURN button to return to
the previous menu.
