18
VQT2M13
STEP 4: AC power supply cord connection
A AC power supply cord (included)
B To a household AC outlet
A AC power supply cord (included)
B To a household AC outlet
C Ferrite core
≥ Connect only after all other connections are complete.
≥This unit consumes a small amount of AC power, even when it is turned off ([BT730] [BT330]: approx. 0.05 W*, [BT230]: approx.
0.1 W*, [BT730] Wireless system: approx. 0.2 W). In the interest of power conservation, if you will not be using this unit for a long
time, unplug it from the household AC outlet.
*When the “Quick Start” setting is “Off”
STEP 5: [BT730] Preparing the wireless system
Turn on the wireless system after all connections are complete.
Main unit
The illustration shows SC-BT730.
The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall
remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug
from AC receptacle.
WIRELESS LINK indicator
Red: The wireless system is on and the wireless link is deactivated.
Green : The wireless system is on and the wireless link is activated.
(“ [W] ” is also displayed on the main unit’s display.)
Press [POWER C I, BÍ] on the wireless system.
Unit on/off button [POWER C I, BÍ]
C I: The wireless system is on.
BÍ: The wireless system is off.
Wireless system
SC-BT230_330_730P_PC_VQT2M13_eng.book 18 ページ ２０１０年１月６日 水曜日 午後１２時８分
