40
VQT2M13
Optional speaker settings
Speaker installation
option
You can attach all of the speakers (except subwoofer) to a
wall.
≥ The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg (22 lbs) per screw.
Consult a qualified building contractor when attaching the
speakers to a wall. Improper attachment may result in
damage to the wall and speakers.
≥ Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
1 Drive a screw (not included) into the wall.
A At least 30 mm (1
3
/16q)
B ‰ 4.0 mm (
5
/32q)
C ‰ 7.0 mm to 9.4 mm (
9
/32q to
3
/8q)
D Wall or pillar
E 5.5 mm to 7.5 mm (
7
/32q to
5
/16q)
2 Fit the speaker securely onto the screw(s)
with the hole(s).
Front speaker
Attach to a wall without the base and the stand.
F 97 mm (3
13
/16q)
G 72 mm (2
27
/32q)
H 348.5 mm (13
23
/32q)
I In this position, the speaker will likely fall if moved to the
left or right.
J Move the speaker so that the screw is in this position.
[BT730] [BT330]
Surround speaker
[BT230]
Front speaker and surround speaker
[BT730]
Center speaker
[BT330] [BT230]
Center speaker
K 200 mm (7
7
/8q)
L 100 mm (3
15
/16q)
[BT330]
Attaching to a wall
Reattaching the speaker cable
Insert the cable
from the bottom.
Leave about
120 mm
(4
23
/32q)
Pull out the cable
through the hole.
SC-BT230_330_730P_PC_VQT2M13_eng.book 40 ページ ２０１０年１月６日 水曜日 午後１２時８分
