- 15 -
Connection
Obs.: The terminals labeled “P/ AMPLIF. DE
AUDIO” (to the amplifier) cannot be
connected to external loudspeakers.
Connect a sound amplifier to the terminals
“P/ AMPLIF. DE AUDIO” on the TV set, as
shown in the illustration below, and follow
the steps 1 through 4.
Connecting to an amplifier (stereo equipment)
Terminals (LINE OUT FOR AUDIO AMPLIFIER)
Connect these terminals to the AUX input of a stereo amplifier to listen to the stereo sound
through the amplifier.
1. Set the amplifier volume to minimum.
2. Set the TV sound volume between 10
and 15.
3. Adjust the sound volume of the
amplifier to the desired level.
4. The sound level and the function MUTE
may be accessed from the remote
control unit.
Connection
Connecting to a videocassette recorder (VCR)
To connect to a videocassette recorder proceed as follows:
1. Connect the external equipment, as
show in the illustration, to the terminals
labeled “ENT” (input).
2. Select the video mode by pressing the
“TV/VIDEO” button on the TV set.
3. Turn on the connected VCR or video
disc player according to instructions in
their respective manuals.
Observation:
If the VCR is connected to the AV input
terminals, press the TV/VIDEO button on
the TV set to display the VCR output on
the screen.
If the VCR is connected to the VHF/UHF
terminals, to display the VCR output, select
on the TV set the channel corresponding
to the video output (3 or 4).
TC-20G12P / TC-29G12P / TC-29G12PU
Operation Guide
