Tuning Channels
37
Advanced
Set Digital TV channel manually
Digital TV Manual Tuning
Set Analogue TV channel manually
Analogue TV Manual Tuning
Fine Tuning
Use to make small adjustments to the tuning of an individual channel (affected by weather conditions, etc.)
Manual Tuning
Set Analogue TV channel manually after Analogue TV Auto Tuning.
Set Sound System and Colour System, and then perform this function.
Normally set Colour System “Auto”.
If a VCR is connected only with the RF cable, select channel position “0”.
1 BBC1
CH33
Analogue TV Manual Tuning
Sound System
Manual Tuning 1 120
Fine Tuning
5.5MHz
Colour System
Auto
CH33
Select a channel position Select a channel Search and store
store
search
●
●
Update channels automatically
Update Channel List
You can add new channels, delete dublicated channels, update channel name and position automatically.
Digital TV Update Channel List
CH Channel Name Type Quality
Digital TV: 0
Searching
Analogue Scan 21 68
Scan CH C1 69
This will take about 7 minutes.
The Digital TV Channel List is updated with the current settings
saved as they are.
●
Display a message
New Channel Message
Selects whether to give a message when new Digital TV channels are found. (Off / On)
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Check Digital TV signal
Digital TV Signal Condition
Selects a channel and checks the Digital TV signal condition.
To change the channel ●
A good Signal Strength is not an indication of suitable signal for Digital TV
reception. Please use the Signal Quality indicator as follows:
Signal Quality:
Green bar
Good
Yellow bar
Poor
Red bar
Bad (Check the aerial)
●
●
●
Digital TV Signal Condition
Channel Name 101 DZFinfokanal
Network Name RiksTV
Parameter [CH21] 474.00MHz
Signal Quality
Signal Strength
0
0
10
10
Normally use “Digital TV Auto Tuning” or “Update Channel List” to update Digital TV channels on your channel
list.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
Digital TV Manual Tuning
Analogue Scan 21 68
Frequency
No. Type New
Digital TV: 0
Signal Strength 0 10
Signal Quality 0 10
MHz
474.00[CH21]
Channel Name
select channel
search
adjust frequency (set where the level of
“Signal Quality” becomes the maximum)
All channels found will be added to the Digital TV Channel List.●
