11
English
Fixing cables
●
To bundle the connected cables, the cable tie that had
bundled the mains lead can be used.
●
Do not bundle the Satellite cable, RF cable and mains
lead together (could cause distorted image).
●
Fix cables as necessary.
●
When using the optional accessory, follow the option’s
assembly manual to fix cables.
■ Cable tie
Attach the cable tie
Insert the cable tie in a hole
Hole
Bundle the cables
Hooks
Set the tip in the hooks
To loosen:
Knob
Keep pushing the knob
To remove from the TV:
Keep pushing both side snaps
Snaps
■ Headphones
●
To adjust volume
[Headphone Volume] in the Sound Menu
●
To select the sound output to adjust volume
[Speaker Setting] in the Sound Menu
TV
(M3 stereo mini plug)
■ Common Interface
●
Turn the TV off with Mains Power On / Off switch
whenever inserting or removing the CI module.
●
If a smart card and a CI module come as a set, first
insert the CI module, then insert the smart card into
the CI module.
●
Insert or remove the CI module completely in the
correct direction as shown.
●
Normally encrypted channels will appear. (The
viewable channels and its features depend on the CI
module.)
If encrypted channels do not appear
[Common Interface] in the Setup Menu
●
There might be some CI modules in the market
with older firmware versions that do not work fully
interoperable with this new CI+ v1.3 TV. In this case,
please contact your content provider.
●
For more information, refer to [eHELP] (Functions >
Common Interface), read the manual of the CI
module, or check with the content provider.
TV
CI module
■ USB HDD (for recording)
●
Use USB 3 for connecting the USB HDD.
●
For more information, refer to [eHELP] (Recording).
■ VIERA Link
●
Use HDMI1 - 4 for VIERA Link connection.
●
For more information, refer to [eHELP] (Functions >
VIERA Link “HDAVI Control™”).
