3
Shooting
46
3 Press J.
The fine-tuning screen appears.
Available operations
4 Press E.
The screen of Step 2 reappears.
5 Press E.
The camera returns to standby mode.
tMemo
• You can set the white balance for when the flash discharges
in [6. WB When Using Flash] of the E1 menu.
You can measure the white balance at a selected location.
1 Select o in Step 2 on p.45 and press B.
2 Use CD to select o1 to
o3.
3 Under the light you wish to measure the white
balance of, select a white area as the subject,
and press the shutter release button fully.
Adjust the white balance as necessary.
[The operation could not be completed correctly] appears
when measuring is unsuccessful. Press E to remeasure
the white balance.
4 Press E.
The camera returns to standby mode.
tMemo
• You can copy the white balance settings of an image
captured with this camera and save them as o1 to o3 in
[Save as Manual WB] of the playback mode palette. (p.52)
AB Adjust: Green-Magenta
CD Adjust: Blue-Amber
M Resets the adjustment value to the default
setting.
CancelCancel
±
0
±
0
G3G3 A2A2
OKOK
OK
MENU
Adjusting the White Balance Manually
Manual White BalanceManual White Balance
CancelCancel
AdjustAdjust
WB
±
WB
±
OKOK
OK
MENU
SHUTTER
