22
5 Select [Start], then press OK to re-install
channels.
To stop searching, select • [Stop] and
press OK.
6 Press MENU to exit.
Manually install channels
This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your system settings are •
correct.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: Manual].
The » [Analogue: Manual] menu appears.
3 Select [System], then press OK to enter.
4 Press to select your country or
region.
5 Press OK to confirm.
6 Press MENU to exit.
Step 2 Search and store new TV
channels
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: Manual].
The » [Analogue: Manual] menu appears.
3 Press to select [Search], then press
to enter.
4 Press Numeric buttons to manually enter
the three-digit frequency.
6 Install channels
The first time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fine tune channels.
Automatically install channels
This section describes how to search and store
channels automatically.
Step 1 Select your menu language
Note
Skip this step if your language settings are •
correct.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Menu language].
3 Press to enter [Menu language].
4 Press to select a language.
5 Press OK to confirm.
6 Press MENU to exit.
Step 2 Select your country
Select the country where you are installing the
TV. The available channels for the country are
installed on the TV.
1 Press MENU.
2 Select [Setup] > [Installation] >
[Channel installation] >
[Channel assistant].
The » [Channel assistant] menu appears.
3 Select [Yes], then press OK to enter.
4 Press to select your country, then
press
to go to the next step.
EN
Downloaded From TV-Manual.com Manuals
