Press CONFIGURE.
6. The Model 1104 will audibly recite the new configuration for
each of the four inputs, responding with “OK,” if it detects
N.O. (normally open), “beep-OK,” if it detects N.C (normally
closed) or “Temperature,” if it detects temperature (regardless
of whether all the inputs have attached sensors or not). If an
input is unused, it is treated as normally open.
Step 2: Set the ID Number
It is recommended that you set the ID number to reflect the
telephone number on which the Model 1104 is installed.
1. Press SET
.
2. Press ID NUMBER.
3. Using the number keys, enter the digits (up to 16 are
permitted) for the ID number. The Model 1104 will recite the
digits as they are pressed.
4. Press ENTER. The 1104 will respond: “Enter.”
