sho se refer to chapter 4.4.2.6w flowcontrol : Plea .
sho e refer to ch
w vlantag : Pleas
apter 4.4.2.7.
sho ease refer to w vlanaware : Pl
chapter 4.4.2.8.
sho e refer to chapter 4.4.2.9w priority : Pleas
.
sho r to chapt
w pvid : Please refe
er 4.4.2.10.
show chapter 4.4.2.11 vid : Please refer to
.
4.4.2.1
Display atus of the Switch and the
correct as below:
Show of GSW-2416SF. The screen in Figure 4-6 appears.
Show port
the status on each port of GSW
usage is shown
-2416SF, this command allows you to view the port st
port: to view all port status
Figure 4-6 All port Status screen
4.2.2.2 Show static [n]
Display the traffic static on specific port of GSW-2416SF, the content include the following items :
z TX OK: Number of transmitted packets.
z RX OK: Number of received packets.
z TX Error: Number of transmitted packets with error ( CRC error etc).
z RX Error: Number of received packets with error (CRC error etc).
Show static [n]: n is the Port ID, n=1-24. To view one specific port static of GSW-2416SF, the port static screen in Figure
4-7 appears.
EM-GSW2416SFv1 - 16 -
