Chapter 6: LCD Panel Operation
62
4. Press or to select the option, Yes, and then press to
confirm.
A message "Auto Adjusting" is displayed on the screen, and the screen
flickers momentarily until it finds the ideal profile.
Resetting LCD OSD Settings
You can restore all of LCD OSD settings to factory defaults at any time.
To reset OSD settings:
1. Press
. The LCD OSD menu appears.
2. Press
or to select the Misc submenu, and press to
confirm.
3. Press
or to select the Reset field.
4. Press
or to select the option, Yes, and then press to
confirm.
Important: You must press
in this step, or the reset function is not
performed.
5. Press twice to quit the LCD OSD menu.
If you change any LCD OSD settings after finishing Step 4, the later
changes are not reset.
Quitting the LCD OSD Menu
The LCD OSD menu automatically disappears if there is no activity from
the LCD control for the period of time specified in the "OSD Time" field
(usually 8 seconds by default). You can also manually exit from the LCD
OSD menu whenever you want.
To exit from the OSD manually:
Press
once or several times until the LCD OSD menu disappears.
