Sending Scan Files by E-mail
12
1
Basic Procedure for Sending E-mail
This section describes the basic operation for sending scan files by e-mail.
Important
❒ This function is available only when Function Upgrade Option is installed.
A Make sure that no previous settings remain.
If a previous setting remains, press {Clear Modes}.
B If the Network Delivery Scanner or Scan to Folder screen is displayed,
press [] to switch to the E-mail screen.
C Place originals.
D Select the destination.
You can specify multiple destinations.
For details, see "Specifying Destination".
E Press [Options], select [Sender's Name], and then specify the sender.
For details, see "Specifying Destination".
F If necessary, press [Options] to specify the resolution and orientation of the
originals.
For details, see "Various Scan Settings".
