A SERVICE OF

logo

Open as PDF
next previous
72
Contents
Chapter Contents
StillImages/Movies
•If the camera is turned on while the <p> button is held
down, the camera will no longer sound. To activate sounds
again, press the <n> button and choose [Mute]
on the [3] tab, and then press the <q><r> buttons to
choose [Off].
StillImages
•Aashing[ ] icon warns that images are more likely
to be blurred by camera shake. In this case, mount the
camera on a tripod or take other measures to keep it still.
•Ifyourshotsaredarkdespitetheashring,movecloser
tothesubject.Fordetailsontheashrange,seeFlash
Range (=
323).
•The subject may be too close if the camera only beeps
once when you press the shutter button halfway. For
details on the focusing range (shooting range), see
Shooting Range (=
323).
•To reduce red-eye and to assist in focusing, the lamp may
be activated when shooting in low-light conditions.
•A blinking [h] icon displayed when you attempt to shoot
indicatesthatshootingisnotpossibleuntiltheashhas
nishedrecharging.Shootingcanresumeassoonasthe
ashisready,soeitherpresstheshutterbuttonalltheway
down and wait, or release it and press it again.
• You can change how long images are displayed after shots
(=
95).