261
Contents
Chapter Contents
3 TurntheTVonand
switchtovideoinput.
Switch the TV input to the video
input you connected the cable
to in step 2.
4 Turnthecameraon.
Press the <1> button to turn
the camera on.
Images from the camera are
now displayed on the TV.
(Nothing is displayed on the
camera screen.)
Whennished,turnoff
the camera and TV before
disconnecting the cable.
•Correct display is not possible unless the camera video
output format (NTSC or PAL) matches the TV format. To
change the video output format, press the <n> button
and choose [Video System] on the [3] tab.
• When the camera and TV are connected, you can also shoot while
previewing shots on the larger screen of the TV. To shoot, follow the
same steps as when using the camera screen.
However, AF-Point Zoom (=
90) and Stitch Assist (=
117) are
not available.
