Changing the Phone Settings 95
Store Emergency Numbers
Note:
Emergency number 911 is hard-coded into the phone. 911 is available
any time, even when the phone is locked or restricted. If you call 911 a
tone plays and an Emergency prompt displays for the call duration.
1. At the Security sub-menu, select Emergency #.
2. Select one of three emergency number entries.
3. Enter an emergency number (up to 32 digits in length).
4. Press to save the number entered.
Call Emergency Numbers in Lock Mode
ᮣ
In standby mode, enter the emergency number, then press
to place the call.
Resetting the Phone
Reset Phone returns all setup options to their factory default.
1. In standby mode, press Menu ➔ Settings ➔
Phone
Settings
➔
Security
➔ Reset Phone. At the prompt,
confirm to restore default settings (except Contacts and
Voice Dial).
2. Press
Yes
to restore default settings.
– or –
Press
No
to retain current settings. The
Security
sub-menu
displays.
Erase all entries
Erase all entries erases all information from your Contacts list.
Note:
To completely remove any personal information stored on your device,
see “Precautions for Transfer and Disposal” on page 126.
1. In standby mode, press Menu ➔ Settings ➔
Phone
Settings
➔
Security
➔ Erase All Entries. You’re prompted
to enter the lock code again.
2. Enter the four-digit lock code using the keypad.
Note:
The default lock code is the last four digits of your mobile phone
number.
The “Erase all entries?” prompt displays on the screen.
3. Press
Yes
to erase all Contacts list entries.
– or –
Press
No
to keep the current Contacts list entries.
