Tools 64
1.
From the Tools menu, select
Calculator. The Calculator
screen appears in the display.
2. Enter the first number in your
calculation using the keypad.
(Numbers can be up to 15 digits
long. Up to 3 of the digits can be
after a decimal point.)
•
To enter a decimal point, press .
•
To change the sign for a number to a negative, press .
•
To add parentheses [
( )
] to your calculation or to enter a
Power
exponent (
^
), such as, 3^2, which is the equivalent of 3
2
, press
Operator
.
•
Press
Clear
to clear current entries.
3. Select a type(s) of calculation.
•
[
x
] Multiplication — Press Navigation key Up.
•
[
÷
] Division — Press Navigation key Down.
•
[
+
] Addition — Press Navigation key Right.
•
[
-
] Subtraction — Press Navigation key Left.
4. Enter the other number(s) and press to perform the
calculation and view the result.
Stop Watch
You can use this function to set a stop watch.
1. From the Tools menu, select Stop Watch. The Stop
Watch screen appears in the display.
2. To start, stop, and resume the
stopwatch count, press .
3. At the start of each succeeding
event/lap, press Record to
record the completion time for
the previous event/lap. You can
record up to eight event/lap
times.
4. To reset the stop watch and to
erase all stop watch (lap) times recorded, press Reset.
Converter
The
Converter
lets you covert one measure of the available
categories (
Currency
,
Length
,
Weight
,
Volume
,
Area
, and
Temperature
) into another.
