To answer an incoming call with the flip closed:
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. When your phone rings or vibrates, press and hold the Side
Volume key ( ) up or down on the left side of the phone.
(The call will be answered in speakerphone mode.)
– or –
Open the phone to use the earpiece.
Note: If the Open menu of the Open/Close Flip feature is set to
No Action, opening the phone will not answer the call. (See “Setting the
Open/Close Flip Option” on page 49.)
Your phone notifies you of incoming calls in the following ways:
ᮣ
The phone rings and/or vibrates.
ᮣ
The LED flashes.
ᮣ
The backlight illuminates.
ᮣ
The screen displays an incoming call message.
ᮣ
If available, the phone number of the caller is displayed.
ᮣ
If the phone number is in your Contacts list, the contact’s
name is displayed.
The following options are also displayed by pressing
(right softkey).
Note: If you set the Open menu of the Open/Close Flip feature to
Answer Call, and if you open the flip when you receive a call, the
options below are not available.
ᮣ
Answer to answer the call.
ᮣ
Answer:Speaker to answer the call in speakerphone mode.
ᮣ
Select Audio to switch the call to your desired device (if
available).
ᮣ
Answer on Hold to put the call on hold. (See “Setting Answer
on Hold” on page 14.)
ᮣ
Screen Call to answer the call by using pre-recorded
announcement. See page 90 for setting up.
ᮣ
Quiet Ringer to mute the ringer. (This feature appears when
the ringer is set.)
Tip: Your phone offers additional ways to answer calls. (See page 48 for
Auto-Answer and page 49 for Any Key Answer.)
Options
13
