PARTS NAMES AND FUNCTIONS
Camera installation bracket
The bracket can be fixed at the top or bottom of the camera.
CAUTION:
When installing the camera bracket, select a location
that can support the total weight of the camera and
accessories.
Control terminals
1 Zoom terminal (ZOOM)
Sets the zoom to wide angle or telescoping.
2 Focus terminal (FOCUS)
Sets the focus to infinite or close range.
3 Grounding terminal (COM)
4 Alarm output terminal (ALARM OUT)
A detection alarm based on the motion sensor is sent to
connected equipment such as a buzzer or lamp or a time
lapse VCR device.
5 Alarm input and color/black & white selection
terminal (ALARM IN)
• When using this terminal for alarm input, connect an
external alarm switch for detecting intruders.
• This terminal can also be used for selecting color or black &
white input. It can be used to force selection of color or
black & white mode by external operation.
Note: The ALARM IN terminal can only receive one type of
input at a time. When using this terminal, use the
ALARM settings to set the type of input. (See p57)
FOCUS ALARM
INZOOM COM
12345
OUT
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
English
5
