:_Ountinq the SCrollsawto a bench
:i 'WSed mounting this Saw to aworkbench a Solid :i ; :
=. : I"- .....
:i:sUpptied with the s_wi:RoWever welrecommend the
Descripiion : : :::: Qtyl ........._..............-_.... "
He× Head Screw, 1!4-20 x length required ............. 3 /
Flat Washers, !14 t.D.............................................. 6 WORKBENCH
LockWashers,I14_.D:............................................3 ... I L/ /"_--
Hex Nuts, 114-20 ............. i....................................... 6 SCROLL SAW BASE
3. A soft foam pad to,place between your scroll saw and : HF.J(HEAl:)SCREW\ l I
workbench is NOT supplied with the saw. However,
we highly recommend the use of such a pad to FLAT WASHER
reduce noise and vibration.
Description Qty.
Soft foam pad such as carpet padding,
'×
...........24 X 12 112. ......... :_........................................... 1
::DO :NOT Over tighten mounting bolts - leave some
. :::Cushion in the foam pad for absorbing noise and
Vibration:
4_: If you prefer to mount y0ur saw to aleg set, we rec-
ommend the leg set for bench top tools which is
available through Sears Retail Stores. The number of
i : this leg Set is9:22244; This leg set is an optional
:: acCessory and instruCti0nS t0 mount the SeroltSaw to
:: thislegsetareinc i]dedinthelegSet package.
1/2" FOAM PAD
(OPI"IlONAL)
WORKBENCH
FLAT
*JAM NUT
i:
12
