ENGLISH
36
Repeat the above steps and until each level is adjusted as desired.
4
Each time these buttons are pressed, “” is moved to the
corresponding LFE level mode.
Each time these buttons are pressed, the LFE level can be
adjusted within the range of either -10~0 dB for Dolby
Digital program sources or -10~+10 dB for DTS and MPEG
program sources.
In general, we recommend the LFE level for Dolby Digital
program sources to be set at 0 dB and +10 dB for DTS
program sources.(However, the recommended LFE level for
some early DTS program sources is 0 dB.)
If the recommended levels seem too high, lower the setting
as necessary.
Press the CURSOR UP()/DOWN() buttons to select the LFE LEVEL CONTROL, then press the
ENTER button.
1
Press the CURSOR UP()/DOWN() buttons to select the desired LFE level mode.
2
Press the CURSOR LEFT()/RIGHT() buttons to adjust the selected LFE level as desired.
3
When selecting the LFE LEVEL CONTROL
