3
DEALER PRE SALE CHECKLIST
SNAPPER PRO HYDRO MID SIZE WALK BEHINDS
The following must be accomplished prior to sale. Refer to pages 1 & 2 for detailed set-up instructions. Review
this list with purchaser. Check (✔) items actually performed and signed on this page.
CUTTING BLADE & MOWER
___BLADE RETAINING hardware checked for proper tightness.
___MOWER CUTTING HEIGHT settings checked and adjusted as needed (with tires properly inflated).
___MOWER SIDE TO SIDE level checked and adjusted as needed (with tires properly inflated).
___MOWER FRONT TO REAR setting checked and adjusted as needed (with tires properly inflated).
PRE-START CHECKS & SERVICES
___TIRES checked and inflated to correct pressures.
___ENGINE OIL level checked. See Engine Owners Manual.
___HYDRAULIC RESERVOIR fluid level checked.
___FUEL added to tank and system checked for leaks.
___BATTERY (Not overfilled!) reinstalled and properly connected with red boot over positive terminal.
OPERATIONAL TESTS
___INTERLOCK SYSTEMS checked to insure proper functioning.
___ENGINE STARTED and throttle control settings checked.
___ALL OPERATIONS as listed on console checked.
___IGNITION SWITCH checked to insure engine stops when turned to OFF position.
___BLADE ENGAGEMENT SWITCH tested for engagement and disengagement of blade.
___BLADE BRAKE function verified. Blade rotation stops in 7 seconds or less.
DEMONSTRATION & INSTRUCTION
___DEMONSTRATED proper operation of mower to purchaser.
___INSTRUCTED purchaser to read and follow instructions in Operator's Manual.
___PERSONALLY HANDED Operator's Manual to purchaser.
___ASSISTED purchaser in completing Product Registration cards.
DEALER'S RECORDS
Sale Date Model Serial No.
Dealer's Name
Signature
Address ____________________________ City
State Zip
Will Mower be used Commercially? Yes___________________ No
Purchaser's Name
Signature
Address _________________________________ City
State Zip
IMPORTANT: This form is to be retained by the dealer for future reference regarding Warranty, proof of
purchase, traceability for product recall or service, etc. Complete the Product Registration Card and Mail to
Customer Service Department at SNAPPER, PO BOX 1379, McDonough, Georgia, 30253.
INSTRUCTION No. 2-9048 (Rev. 2, 8/20/99)
