138
Superimposing a still image in a “Memory Stick” on a moving
picture – MEMORY MIX
Recording a superimposed image to “Memory Stick” as a still
image
Before operation
Insert a recorded “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY.
Make sure that the LOCK switch is set to the right (unlock) position.
(2) In the standby mode, press FN and select PAGE2.
(3) Press MEM MIX. The last recorded or last composed image appears on the
lower part of the screen as a thumbnail image.
(4) Press –/+ on the right lower corner of the screen to select the still image which
you want to superimpose.
–: to see the previous image
+: to see the next image
(5) Press a desired mode. The still image is superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the screen to adjust the effect, then press
OK to return to PAGE2.
(7) Press EXIT to return to FN.
(8) Press PHOTO deeply. Recording is completed when the bar scroll indicator
disappears. The image displayed on the screen will be recorded on a “Memory
Stick”.
1
2
3
4,5
6
FN
MEM
M
I
X
+–
+–
POWER
MEMORY
VCR
CAMERA
OFF
(CHARGE)
LOCK
100–0001
+–
MEM MIX
MCCAM
LUMI
OFF OK
MCCAM
CHROM
CAMCM
CHROM
M. LUMI
100–0001
+–
MEM MIX
OFF OK
+–
M. LUMI
100–0001
+–
MEM MIX
OFF OK
+–
Still image
