A SERVICE OF

logo

PAGE 38/58
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
TANDBE RG
Telepresence T3
8. Fit the two Table tighteners and tighten to remove the gap between the table
top plates.
9. Find the Cable channels and insert them in the hole of the center table top,
slide them out to left and right, respectively. The cable channels must be
fastened with a screw (c) each.
10. Mount all the cables in the table as shown on the following pages.
TA BL E TOP M OD UL E
4 × screw (c)