152 GL-1010 Administrator’s Guide
INSTALLING WINDOWS SOFTWARE
The basic GL-1010 client software includes the GL DocMon
print job monitoring utility and PCL and PostScript (PS) printer
drivers.
Considerations and Limitations
n The GL DocMon utility can monitor GL-1010 devices only.
It does not support earlier versions of the controller or any
third party printer drivers.
n Users must install an GL-1010 printer driver and map it to the
GL-1010 in order to access it using GL DocMon.
n Users can view all jobs in the print queue, including
controller-resident jobs, but a user can delete only his jobs.
n If GL DocMon is installed on a network that employs the
NetBEUI protocol only, SNMP functions, such as device
discovery, are not available.
Prerequisites
Make sure that the client workstation meets the following
minimum requirements:
n Windows 95
M Windows 95 OSR2
M WinSock v2.0
M Novell Client v3.1 for Windows 95/98 plus Client
Service Pack 1
*
n Windows 98
M Novell Client v3.1 for Windows 95/98 plus Client
Service Pack 1
*
n Windows 2000
M Novell Client 4.7 for Windows NT/2000 with Z.E.N
works starter pack
*
M Microsoft Windows 2000 Service Pack 1
n Windows Me
M Novell Client v3.3*
*.Required only if you will be running IPX-based SNMP access and Novell printing.
