3
6 F 8 A 0 9 3 4
SAFETY PRECAUTIONS (continued)
Safety Precautions for Hazardous Locations
Do not disconnect while circuit is live unless location is known to be nonhazardous.
’
Live part of electric circuit or a high temperature department can cause explosion.
Do not modify or disassemble the enclosure.
’
Strength degradation and defects of enclosure can cause explosion.
Do not use parts of other products.
’
Protective performance degradation for hazardous location can cause explosion.
Do not touch circuits until assembly of all components is over.
’
Protective performance degradation for hazardous location can cause explosion.
Install per the National Electrical Code for the US (NEC, ANSI/NFPA 70) and the
Canadian Electrical code for Canada (CEC, CAN/CSA-C22.1) and the drawing
3S8A2699(Refer to Appendix 2.).
Unsuitable conduit connections for hazardous location can cause explosion.
