TP-Link TL-ER604W Manual

A SERVICE OF

next previous

-76-

data via this port. The IP address of next hop is 116.10.1.254 and the hop count is 1. The effective

time of this entry is 1 second.

Note:

● RIP function cannot be set if the Router is in NAT Mode. To set RIP function, please change the

System Mode to Routing or Full Mode.

● The RIP function of WAN port takes effects only when the Connection Type of this WAN port is

Static IP.

3.4.5.3 Route Table

This page displays the information of the system route table.

Choose the menu Advanced→Routing→Route Table to load the following page.

Figure 3-49 RIP

The following items are displayed on this screen:

 Route Table

Destination:

The Destination of route entry.

Gateway:

The Gateway of route entry.

Flags:

The Flags of route entry. The Flags describe certain characteristics of the

route.

Logical Interface:

The logical interface of route entry.

Physical

Interface:

The physical interface of route entry.

Metric

The Metric of route entry.